Cover all - Front & Back

Medical PPE

The Protective Coveralls are designed to help protect against hazardous dusts (Type 5), light liquid splashes (Type 6), low pressure liquid sprays (Type 4) and high pressure liquid jets (Type 3).

  • 1. Advanced film technology
  • 2. Soft material reducing noise from movement
  • 3. High levels of chemical hold out and mechanical strength
  • 4. Certified to offer protection against radioactive particulates (EN 1073-2) and biological contaminants (EN 14126)
  • 1. Anti-static treated (inside only) to EN 1149
  • 2. Elastic waist is adhered with glue to minimize potential entry points
  • 3. Elastic wrists and ankles for convenience and freedom of movement
  • 4. Three-panel hood design for a better fit and compatibility with other PPE
  • 5. Chin flap with easy grab sealable tape for ease of use and secure fit
  • 1. Two integrated storm-flaps combined with double color-coded zip to create a double seal for added convenience and extra protection
  • 2. Large ring-pull zippers for easy donning and doffing when wearing gloves
  • 3.Seams are taped with a multi layer co-extruded clear tape which offers a discreet finish and a consistent seal and barrier to hazardous dusts and high pressure liquid jet

Comfort & Production

Materials & Sizing

Use Limitations

Storage and Disposal

  • 1. Store in dry, clean conditions in original packaging
  • 2. Store away from direct sunlight, sources of high temperature, and solvent vapors
  • 3.Store within the temperature range -20°C to +25°C (-4°F to +77°F) and with relative humidity below 80%
  • 4. Shelf life is three years from date of manufacture when stored as stated above
  • 5.Replace garments if damaged, heavily contaminated or in accordance with local work practice
  • 6.Handle and dispose of contaminated garments with care and in accordance with national regulations